Toronto Flat Roofing Company Installers – An Introduction To Roofing Terms

Toronto Flat Roofing Company Installers – An Introduction To Roofing Terms

Are you totally clueless about flat roofing? Most Home owners are. It is sometimes
frustrating to hear your Toronto Flat Roofing company mentioning certain words whose meanings you
are unaware of, and you have to keep asking for clarification. While a Toronto flat roofing company representative will strive to express things in a simplified way, it would still do well for
you to be conversant with the mostly used terms in roofing so as to make
communication even easier. Here is a compilation of the most important terms in
roofing and what they actually mean:toronto-flat-roofing-company

Shingles

A shingles is a small piece of roofing material. Shingles are arranged in such a
way that they either fit into or overlap one another to provide the entire
covering of the house.

They can be made from stones, clay, metal, wood or any other tough, non absorbent
materials. Unlike large, flat roofing
panels, the small pieces are easy to transport and fix. The most commonly used
shingles are made from asphalt.

Eave and Drip edge

An eave is the part of the roof that extends past the walls of the house. Eaves
should be long enough to prevent the roof from pouring rain water onto the
walls and foundation of the house.

For taller buildings, the developer may avoid very long eaves and instead install
drip edges along them to redirect water and dispose it of safely.

Flashing

Flashing is a technique that is used around protruding structures on the roof to prevent
water from dripping inside the house through the gaps in between their borders.
Specially made shingles are usually placed around these areas. They are special
because their shapes and tracks defer from the rest to make them direct water
side ways.

Crickets

Crickets are part of the specially molded shingles that divert water away from
protruding structures on the roof. they are more like ridges with sideways
flow, but their edges fit or overlap perfectly with other shingles.

Deck

In Flat Roofing, a deck is the base on which shingles are arranged on the roof.
Depending on your budget and preference, you may make your deck out of wood,
plastic or metal boards. Bases made from thin metal sheets tend to last longer than the rest.

 

Rafters

Also known as beams, these are the wood or metal structures that criss-cross at the
upper part of a building to provide a support flat roofs from below and ceilings
from above. A materials used to construct rafters should be light but strong.

Blistering

Blistering is the slight upward or sideways displacement of shingles that happens when
they absorb water or if bubbles get under them. Blistering due to absorption
mainly happens with wood shingles.

If flat roofs are inserted well by a professional Toronto Flat Roofing company, it is
very difficult for such problems to arise. If your roof tends to get blister
often, you might need an overhaul repair or replacement to prevent damage of
your ceiling. Are you experiencing issues with your roof?
Contact the best Toronto flat roofing company for help.